Q&A for How to Make a USB Bootable

Return to Full Article

Search
Add New Question
  • Question
    Can this answer be expanded to include Windows 10?
    Community Answer
    Community Answer
    The method listed first (method 1) also works for Windows 10, just follow along as if it were Windows 8.
  • Question
    Will this remove the operating system that the PC is running?
    Algertzharri
    Algertzharri
    Community Answer
    You are making your USB bootable, like a CD. So there will be no change in the running PC.
  • Question
    If it is 64 bit and I shouldn't use the formatting method FAT32, should I skip it, or format to NTFS?
    Community Answer
    Community Answer
    FAT32 is a drive organization scheme, it doesn't matter whether your processor is 16, 32, 64, or 128 bits. You need to use FAT32 if you're going to make a DOS-bootable flash drive, but you'll be limited to a flash drive no larger than 32 GB; you cannot format a larger partition than 32 GB with FAT32. If you need that much space then you must use NTFS, and you won't be able to use plain old DOS to access it.
  • Question
    I don't see my disk listed in Method One. Why not?
    Algertzharri
    Algertzharri
    Community Answer
    Check carefully, because it should be. You can verify it by opening "My computer" and see if your USB is there.
  • Question
    Method 1 mentioned that format in fat32, but will it work?
    Community Answer
    Community Answer
    Yes, if your computer is 32bit. If it is 64bit, do not use this method.
  • Question
    I'm using method 2. Is it normal that nothing happens after entering the password?
    Community Answer
    Community Answer
    Yes this is normal. Just wait until the a message appears that everything was successful. This can take pretty long, so just keep waiting.
  • Question
    For method two, I did everything correctly until step 14, and when I put in my password, the terminal said "dd: /dev/disk1: Resource busy." Is this correct?
    Community Answer
    Community Answer
    This means the USB drive is mounted in MacOSX. You need to unmount it. If that doesn't work, clear off the disk in Disk Utility; then, unmount it and try again.
  • Question
    I'm using Method 2 on Terminal. How do I know when the process is complete?
    Community Answer
    Community Answer
    It will say, "100 percent completed. DiskPart successfully formatted the volume."
  • Question
    What do I do after closing the command prompt in Method One?
    Community Answer
    Community Answer
    First, type exit in the command prompt, then from the taskbar there will be an icon looks like a USB and a true mark. Click it and click on the USB Drive. Now unplug the USB Drive and have fun.
  • Question
    Can I revert back to a regular flash drive after making it bootable?
    Community Answer
    Community Answer
    Yes. Making a drive "bootable" does not detract from its ability to store data.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit

Return to Full Article

You Might Also Like

Use RufusUsing Rufus to Create Bootable USB Drives: A Step-By-Step Guide
Use an Operating System from a USB StickUse an Operating System from a USB Stick
Install Ubuntu Linux Install Ubuntu Linux: Dual Boot with Windows or macOS
Boot Linux from a USB on Windows 10 Run Linux from a USB: Making a Bootable Stick and Installing
Install a New Operating System on Your Computer Install a Different Operating System on a PC
Install Two Operating Systems on One Computer Install Two OS on One Computer: Easy Dual Boot Guide
Install Windows from a USB Flash Drive Install Windows 11 or 10 on a Computer: USB Method
Create a Recovery DiskCreate a Recovery Disk
Install Linux Install Linux on Your Computer
Format a Hard DriveFormat a Hard Drive
Install an Operating System on a Brand New ComputerInstall an Operating System on a Brand New Computer
Install Ubuntu Linux Without CD (Windows) Install Ubuntu Without an CD: Step-by-Step Tutorial
Create a Bootable Windows 7 or Vista USB DriveCreate a Bootable Windows 7 or Vista USB Drive
Install Linux Mint Install Linux Mint